Tesla swap C10

AEM EV 1973-87 Chevy C10 Rear Tesla Subframe Mount Kit

This Tesla swap Squarebody C10 kit from AEM is designed to adapt the frame of a 1973-1987 C10 pickup (Long or Short Bed) to accept a 2012-2021 Model S or 2015-2021 Model X Tesla rear subframe/motor assembly. The kit is pre-engineered to rigidly mount the applicable Tesla subframe in the correct position on the truck frame to achieve proper suspension geometry while substantially increasing the rigidity of the truck frame.

This kit also incorporates upper coil over shock mounts to pair with Holley Part Number HEV001-001 to successfully convert the stock Tesla coil over suspension to an aftermarket coil over shock system that is positioned lower to allow a clean fit into the swap truck without having to clearance any of the truck bed. Depending on the coil over shocks used this kit will accommodate a 4-6-inch drop from factory ride height in the rear of vehicle so it is advisable to also lower the front of the vehicle. An excellent addition to this kit is the SpeedMax kits for the front of the vehicle offered by Detroit Speed.

For more information visit www.holley.com.