All New, All Billet Components from All American Billet
The crew from All American Billet have been hard at it with a long list of new products ranging from precision fit Billet Timing Covers for LS/LT engines to sun visor clips for vintage Mustangs or OBS trucks.
Based in Phoenix, Arizona, All American Billet designs and manufactures CNC-machined billet components including hood hinges, accessory drive assemblies, suspension components, and loads of trick accessories to make your project car or truck stand out. As the name implies, all of their products are proudly designed and made in the USA.
It seems that the scorching Arizona summer kept the engineering team indoors as All American Billet has introduced all sorts of new products recently – here’s a few of their latest CNC-machined jewelry!
Billet GEN3 and GEN4 LS Front Timing Chain Covers
Replaces the ugly stock cast timing chain cover of your LS with these slick billet aluminum covers. CNC-machined from 6061 aluminum, the two-piece covers are available in machined finish, polished or black anodized an are supplied with stainless steel hardware.
These valve covers are taller than factory covers to accommodate most aftermarket roller rockers and feature a smooth finish sans the mounts for the coils. Machined from 6061 aluminum, the pair are supplied with billet oil fill caps. gaskets, and mounting hardware. Compatible with all 1999-2014 GM LS series engines, are approximately 1.5” tall, and available in machined, polished, or black anodized finishes.
Dress up your engine with a great looking billet valley cover. These covers are also compatible with Gen IV Engine Blocks (LS2 LS3 LS7 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG L98 L9H L20 L94 LZ1 L99 L96 LC8 L77). There is no need to drill, tap, and plug the DOD oil port in engine block as All American’s are designed with a seal built into valley cover to plug these, though you must plan to relocate the oil pressure sensor. Made in the USA from 6061 Billet Aluminum, supplied with O-rings and stainless steel bolts and available in machined, polished, or black anodized finishes.
’88-’98 Chevy Truck Door Sill Plates
Get rid of those nasty, cheap looking OEM sill plates in your OBS truck with AAB’s Billet Door Sill Plates. The billet sill plates simply screw into place with flush mount 10-24 Stainless Steel Flat Head hex key screws and feature pockets with an eye-catching tool-path design. Machined from 6061 aluminum, the sill plates are sold in pairs only and available in machined, polished, or black anodized finishes.
Column Shifter Handle for ’95 – ’98 Chevy Trucks
It’s the little details that make a big difference! All American’s new Billet Shift Handle is a subtle interior upgrade for ’95 – ’98 GM trucks. Available in machined, polished, black anodized fand their exclusive Silverline finishes. Shift Knob is included with Shift Handle.
Billet Sun Visor Clips for ’99 – ’06 GM Trucks and a Center Clip Classic Fords
These Sun Visor Clips are machined from 6061-T6 billet aluminum and simply bolt-into the stock location to replace the broken, cracked, or missing visor clips. Sold in pairs to fit ’99-’06 GM trucks and available in machined, polished, or black anodized finishes.
For classic Fords, All American offers this Billet Sun Visor Center Clip that is designed to fit a ’68-’79 F-100, F250, F350; ’78-’79 Bronco; ’68 Mustang; ’68-’71 Torino and ’70-’71 Maverick and installs in the stock location. available in machined, polished, or black anodized finishes.
To see more trick components and accessories, head over to All American Billet.
